15
5).
PTO (power take-off) / Drive shaft.
1-
Read and learn the manufacturer’s instructions for the drive shaft.
2-
Check that the PTO guards are in place and in a good condition. Replace them
immediately if damaged.
3-
Adjust the length between the tractor and the machine, retaining maximum
engagement.
4-
The minimum engagement length is
250mm
. See white instruction stickers placed
on the front of the unit, n° 892 640 (page 11).
Before each operation, check that the drive shaft is in good condition and that it is
fitted and locked correctly.
5-
Only use the drive shaft provided with the equipment or recommended by the
manufacturer.
6-
Check before each use that the speed and direction of rotation of the tractor PTO are
compatible with the planned usage of the equipment.
6).
Maintenance and repair.
6.a.
General.
1-
Maintenance and repair operations must only be carried out by qualified people.
2-
Always maintain the equipment and its accessories in perfect working order to ensure safe
and efficient operation.
3-
Check the cleanliness of oil.
4-
Respect maintenance periods.
Before any servicing or repair:
5-
Check the stability of the machine and its components.
6-
Lower the equipment to the ground.
7-
Fit any provided stability devices (stands, etc.).
8-
Check that all moving parts are stopped.
9-
Disengage the tractor PTO.
10-
Disconnect the hydraulic power hoses between the tractor and the machine.
11-
Stop the engine and remove the starter key, disconnect the battery (or the electric
connector).
12-
Engage the handbrake.
