17
4-
Damaged or defective protective devices or casings must be replaced immediately.
5-
Any original protective device fixed to the equipment must not be removed or
modified.
6-
Hydraulic hoses that originate from another hydraulic system must not be re-used.
7-
When a rigid or flexible line is damaged, it must be replaced immediately.
8-
Repairs affecting components under pressure or electrically powered require special
tools and procedures. They must only be carried out by qualified staff.
7.
Environmental protection.
Ground pollution:
1-
Make sure that you do not spill or discard in any drainage system used lubricating
oil or other substances such as hydraulic oil…
2-
Collect used fluids in sealed, clean containers designed for the purpose. Avoid using
containers used for food or drink bottles.
3-
Used tyres. It is against the law to store tyres or to dump them, dispose of them in
the natural environment or burn them in the open air. Take them to a dealer or an
approved collector.
8.
Fitting and installation.
Hitching to the tractor
1).
Coupling.
1-
See page 8 (technical characteristics) and page 14 (coupling).
2-
Read sticker page 11
(ref: 892 640).
3-
Couple the ring on the drawbar of the spreader to the attachment point or axle hook
on the rear of the tractor.
4-
Check the lockings.
2).
Drive shaft.
2.a.
Primary drive shaft.
1-
Read sticker page 11
(ref: 892 640).
