recommended to reduce the brightness at certain time, reduce power dissipation,
and reduce dust on the fan in order to extend the lifetime of your light.
A,- When the brightness of light is low (less than 30% of multiple groups of
LEDs or less than 50% of singe groups of LEDs), the light temperature is
comparably low (lower than 40
℃
), the fan does not work.
B, - When the brightness increases, and the temperature rises to around 45
℃
,
the fan starts working. When the temperatures reaches 50
℃
, the fan works at
maximum speed.
C,- Lower the brightness so the light temperature drops. When the temperature
is below 40
℃
, the fan stops working.
3) The light has thermal detect system. If the light temperature exceeds 68
℃
, for
example, when you adjust the light at maximum brightness in summer time, the
system will turn off the light. It will turn on again when the temperature recover
to normal. When the light is in overheated protection, the changes you make in
APP will only be saved the data, but not display by the light.
4) The light has the thermostat. When the light temperature reaches 75
℃
, the
thermostat cut off automatically to disconnect the power to ensure safety.
Jebao Co., Ltd.
Add
:
Tongmao Industrial Park, Dongsheng, Zhongshan, Guangdong, China
Tel
:
+86-760-28136708, 28136720
Website:
Summary of Contents for AL Series
Page 4: ...3 LED Diagram AK 70 AL 120...
Page 5: ...AK 80 AL 90 AL 150 AL 200 4 LED Spectrum Diagram...
Page 14: ...7 3 2 Add new light Go to My Groups Go to Settings Add new devices Add new devices...
Page 19: ...Check Device is in AP configuration mode and tap Next Enter the Wi Fi password and tap Next...