Current instructions at www.jeco-inc.com
1-800-893-3006
Page 3 of 3
Step 4:
Shape the branches to your preference by working from the bottom to the
top,
When shaping the branches start with tips farthest from the pole. One to the
right, one to the left, and one at the center of the main stem.,slightly upseep all
branch tips for a uniform look.
WARNING-Risk of Fire and Electric Shock:
1.
Read all instructions and warning tags included with this tree.
2.
For Indoor and Outdoor Use.
3.
Do not place near gas or electric heaters, radiators, fireplaces, or other
similar sources of heat.
4.
Place on a level, hard, flat surface; do not place where tree is likely floors or
thick carpeting.
5.
Do not use candles on tree.
6.
After assembly and adding decorations, make sure the tree is stable. If
stable, shift the weight of the decorations, and use support wires to walls
and/or window frames (make sure they are secure also).
7.
Do not overload extension cords or power strips, see ratings on those
devices and check the rating labels on the tree for compatibility.
8.
Do not install near fountains, bathtubs, sinks, pools or other areas of
standing water.
9.
Only use this product with extension cords rated for indoor and outdoor use.
Care and Cleaning:
Step 1:
Remove all ornaments and decorations.
Step 2:
Unplug the cord from the wall and then unplug each section of the tree
.
Step 3:
Gently lift the tree top straight up to remove from the center section and
fold
all brancees towards the pole.
Step 4:
Carefully place all tree sections into a shipping box and tape it shut.
Step 5:
Store your tree in a cool, dry place away from sunlight.
