Pull the quick-release
lever
Gently pull the strap away
Your watch is fitted with a wooden strap but also comes with an additional leather strap in the
box. Each of the straps has a quick-release spring bar which you can pull using the quick-
release lever, allowing you to easily take the strap on and off in a few seconds.
C H A N G I N G T H E S T R A P
Aspen (BH89)
User Manual
To attach a strap, first insert the spring bar pin opposite the quick-release lever into the
case hole. Then, gently pull the quick-release lever to align the pin on the other side with
the case hole until you hear a click. Check that the strap is secure by gently pulling on it.
To remove the strap, pull the quick-release lever and pull the strap away gently.
Align the pin with the case hole
until you hear a click
Insert the spring bar pin
into the case hole
Pull the quick-release lever
Page 2/2
