Jedi JEDI-700, Manual

ENGLISH

21

4. Adjusting the sensitivity (default: 4)

This menu allows the sensitivity of the device, when the door encounters an obstacle, to be increased or decreased.

This parameter is already set to a mid value (4) that should be ideal for the majority of installations.

3. Self learning of the forces

Press the 

-

key, 

the display shows 

3

Press the 

key: 

3

flashes - the door opens

When the door stops, press

the 

key to confirm.

Press the 

key once more

to continue - the door closes

When the door stops, press the

key to save the settings.

The display shows 

3

Press the 

-

key, 

the display shows 

4

Press the key 

: 

0

flashes

Select the desired level using the 

+

and 

–

keys

m

PLEASE NOTE: On completion of the procedure, it is possible to exit the programming procedure, storing the parameters

set: press and hold the 

key for 5 seconds until the segments of the display illuminate one at a time until showing

0

m

PLEASE NOTE:  if this parameter is modified, then on completion of programming, it is

necessary to conduct a complete open/close cycle, during which the control unit automatically
conducts a fresh force training operation (during this cycle, the motor works at maximum force,
so particular attention must be paid).

Press the 

key to save 

the settings: the display

shows 

4

6. Open alarm (default: 0 – function deactivated)

If this function is activated, the device emits BEEPs for 30 seconds when the door remains open for longer than 10 minutes. The alarm is
repeated every 10 minutes. Close to door to interrupt the alarm.

Press the 

-

key, 

the display shows 

6

Press the 

key: 

0

flashes

to indicate that the function

is deactivated

Press the 

+

key to activate

the function: the display

shows 

I

Press the 

key to save 

the settings: the display

shows 

6