Jedo LARK, Manual

To raise the footrest, lift it upwards, it will lock automa-
tically. The footrest can be extended by pulling out the 
plastic footrest and fixing it in the corresponding holes 
(Photo no. 18 a,b,c).

16. ADJUSTING THE SAFETY BELT (SEAT) 

The seat is equipped with a 5-point safety belt. Use it 
from the moment when the baby starts to sit on their 
own. Undo belts, removing the fork from the central 
buckle, place the child in the seat, adjust the length of the 
belt by means of brackets, so that they fit the child’s body 
but are not too tight, then plug the fork back into the 
central belt buckle (Photo no. 19). To remove the belt, 
open the flap in the rear of the backrest, then pull the 
buckles located at the ends of the belt through the holes 
in the backrest. This is the way to dismantle the belts 
positioned above the child’s shoulders. Lap belts are 
fixed in place and they cannot be dismantled. If we want 
to dismantle one of the elements of the cover of the seat, 
dismantle the shoulder straps and drag the entire belt 
with the buckle through the hole in the seat cover. The 
seat belt has an additional crotch belt, which is fastened 
around the railing using press-studs. This is an additional 
element, and does not exempt from the application of the 
5-point safety belt.

WARNING

! Always use seat belts when the child is able 

to sit independently.

17. REMOVAL OF SEAT COVER

Dismantling is performed by first removing the hood 
(Pos. 11) and removing the 5-point belt (paragraph 16). 
The next step is taking off the material of the seat, by 
removing the 4 elastic bands located in the bottom of the 
seat (Photo no. 20 a,b), which hold the material in place. 
Then remove the material of the seat, by sliding it from 
the slots located around the seat backrest (Photo no.21 a,b).

WARNING

! When putting on the material of the seat, pay 

attention that the retaining elastic bands do not get into 
the backrest folding mechanism (Photo no .22 a,b).

18. HANDLE HEIGHT ADJUSTMENT

Simultaneously press the two buttons on both sides of 
the inside of the handle and move the handle to increase 
or decrease its height accordingly. (Photo no. 23)

19. UNFOLDING OF THE STROLLER

WARNING!  In order to unfold the frame, one should 
dismantle the carry cot or the seat, unfold the mechanism 
of central plugging (photo 24 a,b) and put the handle so 
that it sticks to the frame’s profile. (photo 25)

WARNING!  

Stroller must always be collapsed with the 

front wheels unlocked.
Then, one should unfold the frame by pressing the button 
on the handle for carrying the frame ( photo 26) 
In order to further reduce the size of the stroller before 
starting the collapsing procedure, remove the wheels.

20. RAIN COVER

The stroller is equipped with a rainproof cover with vents, 
for both the carry cot and the seat. To mount it, slide one 
end onto to the hood, and the other onto the carry cot 
(from the side of the lever).

21. MOSQUITO NET

The carry cot and the seat are equipped with a mosquito 
net; to mount it, slide one end (marked INSERT) onto 
the hood and attach it with press-studs located on both 
sides, then hook the other end of the mosquito net to the 
carry cot or the footrest of the seat.

22. CAR SEAT INSTALLATION

The stroller is also manufactured in a version with a car 
seat, for children weighing from 0 to 13 kg. In order to 
install the car seat, first put the adapters on the stroller 
chassis, plugging them identically as for the carry cot, 
then mount the seat on the adapter. It plugs in automa-
tically. 

WARNING!

 Before using the seat, make sure that the 

adapters are properly mounted.
In order to unplug the adapters, press the button on the 
side of the seat, repeat for the other side. 

WARNING!

The car seat, used together with the chassis, does not 
replace a crib or bed; should the child needed to sleep, 
it is recommended to place it in a proper carry cot, crib 
or bed.

With the use of brand adaptors, the following baby seats 
can be installed on a TRIM stroller:

 1. The MM Adapter 
 

-Maxi – Cosi : Cabriofix, Citi, Pebble 

-Cybex: Aton 3, Aton 4, CBX 

-Kiddy: Evolution Pro2,Evo- Lunafix 

-Safety 1st : Mimas 

-Recaro: Privia 

- Avionaut:Ultralite , Kite

2. The MR Adapter 
 

- Römer: Baby Safe Plus, Baby Safe Plus SHR II