JOBNAME: CHRY OM INTL (Conten PAGE: 262 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 35DCE949
/chry_pdm/chrysler/owners/grc/og
Jacking Instructions
WARNING!
Carefully follow these tire changing warnings
to help prevent personal injury or damage to
your vehicle:
•
Always park on a firm, level surface as far
from the edge of the roadway as possible
before raising the vehicle.
•
Turn on the Hazard Warning flasher.
•
Block the wheel diagonally opposite the
wheel to be raised.
•
Set the parking brake firmly and set an
automatic transmission in PARK.
•
Never start or run the engine with the
vehicle on a jack.
•
Do not let anyone sit in the vehicle when it
is on a jack.
•
Do not get under the vehicle when it is on a
jack.
•
Only use the jack in the positions indicated
and for lifting this vehicle during a tire
change.
(Continued)
WARNING!
(Continued)
•
If working on or near a roadway, be ex-
tremely careful of motor traffic.
•
To assure that spare tires, flat or inflated,
are securely stowed, spares must be
stowed with the valve stem facing the
ground.
1. Remove the spare tire, jack, and tools from
storage.
2. Loosen (but do not remove) the wheel lug
nuts by turning them to the left, one turn, while
the wheel is still on the ground.
3. Assemble the jack and jacking tools.
4. For a front tire, place the jack and protective
cap on the body flange just behind the front tire
(as indicated by the triangular lift point symbol
on the sill molding).
Do not raise the vehicle
until you are sure the jack is fully engaged.
Jack Warning Label
Jack and Tool Assembly
260
art=060600714.tif
NO TRANS
art=060533361.tif
NO TRANS