JOBNAME: CHRY OM INTL (Conten PAGE: 54 SESS: 2 OUTPUT: Fri Jun 4 10:52:37 2010 SUM: 210FB92A
/chry_pdm/chrysler/owners/grc/og
tether first lower the arm rest. The tether is
located behind the armrest and hooked onto
the plastic seat backing.
Pull down on the tether to unhook it from the
plastic seat backing, then raise the armrest and
attach the tether hook to the strap located on
the front of the arm rest.
For center seating position route the tether
strap over the seatback and headrest then
attach the hook to the tether anchor located on
the back of the outboard seats. For the out-
board seating positions, route the tether under
the head rests, and attach the hook to the top
tether anchor located on the back of the seat.
To access the top tether strap anchorages
behind the rear seat, pull the carpeted floor
panel away from the seat back, this will expose
the top tether strap anchorages.
Center Seat Position Arm Rest Tether
Center Seat Position Arm Rest Tether Attached
Pulling Down The Carpet Floor Panel To
Access Top Tether Strap
Top Tether Strap Anchorage (Located on
Seatback)
52
art=022633125.tif
NO TRANS
art=022633126.tif
NO TRANS
art=022634157.tif
NO TRANS
art=022634158.tif
NO TRANS