IMPORTANT SAFETY INSTRUCTIONS
The amplifier has been designed to operate at the highest level of efficiency and
performance in any normal operating situation; however, there are a few important use
and care principles that must be kept in mind when operating the amplifier:
§
Read these instructions.
§
Keep these instructions.
§
Follow all instructions.
§
Do not expose the amplifier to rain, moisture, or excessively damp conditions.
§
Do not block any ventilation openings.
§
Due to auto-ranging circuitry and dual-stage voltage regulation, the audio
performance will not be affected by any voltage fluctuations within the operating
voltage range. The
MODEL 735 MONOBLOCK AMPLIFIER
can be operated at any
mains voltage over the range of 85 to 265 VAC without any adjustments
necessary.
§
The
MODEL 735 MONOBLOCK AMPLIFIER
must not be modified in any way, other
than according to official service bulletins from JRDG (Jeff Rowland Design
Group). Otherwise, the factory warranty will be immediately voided.
§
When operating the
MODEL 735 MONOBLOCK AMPLIFIER
, a properly grounded AC
receptacle should be used. A potential shock hazard may result if the supplied 3-
wire, grounded AC cable ground terminal is defeated or lifted or the unit is
connected to a 2-wire ungrounded AC outlet.
§
The
MODEL 735 MONOBLOCK AMPLIFIER
is designed to perform optimally with no
adjustments or maintenance for the lifetime of the product. Do not attempt to
open the bottom or top cover of the amplifier and refer all service issues to
qualified personnel. The voltages inside the
MODEL 735 MONOBLOCK AMPLIFIER
can be hazardous.
PROTECTIVE SYSTEMS
The
MODEL 735 MONOBLOCK AMPLIFIER
is equipped with internal fuses for protection
against excessive AC current draw; however, since no protection circuitry or
system can completely protect a product from every electrical hazard, certain
precautions should be observed. In the event of severe voltage hazards such as
lightning or when the amplifier will not be used for extended periods of time, the
amplifier should be unplugged from the AC mains to avoid potential damage to
the internal circuitry. All other audio/video system components should also be
disconnected from AC mains power as hazardous voltages can easily travel
throughout an interconnected system.
The crossed-out wheeled bin is the European Union symbol for
indicating separate collection for electrical and electronic equipment.
This product contains electrical and electronic equipment which
PAGE 1