ADJUSTING RECORD OUT LEVEL
Enter
MENU
. Scroll and select
RECORD OUT LEVEL
. The main volume indicator shows the
gain of the selected input routed to the
RECORD-OUT
jacks. Adjust the level with the front
panel’s volume knob or the remote’s
REC OUT VOL +/
−
buttons.
The
RECORD OUT LEVEL
mode is also entered by pressing either of the remote’s
REC OUT
VOL +/
−
buttons. Exit by pressing any of the
MENU
buttons.
INDEPENDENT PHASE INVERSION
Enter
MENU
. Scroll and select desired phase condition. Possible phase conditions
include
PHASE NORMAL
,
INVERT BOTH
,
INVERT RIGHT
, and
INVERT LEFT
as indicated on the
display. Exit by pressing any of the
MENU
buttons.
The
CORUS PREAMPLIFIER
's independent phase inversion control on each channel is an
important system debugging tool. It facilitates effective troubleshooting of phase
inversion problems on associated electronic components, speakers, speaker wires, and
interconnects, particularly in complex audio systems consisting of multiple amplifiers and
multiple source components.
SETTING OUT 2 OFFSET
Enter
MENU
. Scroll and select
OUT 2 OFFSET
.
The balance indicator bar temporarily shows
the amount of offset. Adjust the offset with the front panel’s knob or the remote’s
NAVIGATION RIGHT (
) NAVIGATION LEFT (
)
buttons. Exit by pressing any of the
MENU
buttons
.
SETTING INPUT OFFSET
Enter
MENU
. Scroll and select
INPUT OFFSET
.
The balance indicator bar temporarily shows
the amount of input offset gain
. Adjust the offset with the front panel’s knob or the remote’s
NAVIGATION RIGHT (
) NAVIGATION LEFT (
)
buttons. Exit by pressing any of the
MENU
buttons.
ADJUSTING
OUT 2 OFFSET
Enter
MENU
. Scroll and select
OUT 2 OFFSET
. The balance indicator bar temporarily shows
the amount of offset
.
Adjust the offset with the front panel’s knob or the remote’s
NAVIGATION RIGHT (
) NAVIGATION LEFT (
)
buttons. Exit by pressing any of the
MENU
buttons.
FACTORY RESTORE
Enter
MENU
. Scroll and select
FACTORY DEFAULTS
. This action returns all configuration
and adjustments to the original factory-set default values: Main and record volume levels
are set to 0dB, input device name assignments are cleared, input and output gain offset
adjustments are zeroed, and the
CORUS PREAMPLIFIER
is returned to AC operation.
21
