USER MANUAL
JEFC200L10B-230
200L
AIR COMPRESSOR
•
230V
~
50Hz
•
3HP
•
10Bar
•
BELT DRIVE
www.jeffersontools.com
10
Label
Potential Hazard
Prevention
Water directed at electrical connections or switches, or
objects connected to an electrical circuit, could result in
a fatal electrical shock.
Moisture or a liquid of any kind may conduct electricity
and could result in a fatal electrical shock.
Note:
This equipment is not waterproof
.
Never attempt to clean the air compressor while it is
running. Direct any water or spray away from electric
outlets and switches.
Keep your air compressor out of the elements and well
sheltered from rain, snow, dew, water or mist of any kind.
Do not use the compressor with the supply cord damaged
or with poor quality connections
Operating the air compressor in an explosive
environment could result in a fire.
Materials placed against or near the air compressor can
interfere with its proper ventilation causing overheating
and possible ignition of the materials.
Improperly stored paint thinners could lead to accidental
ignition.
Good air flow is important as both the motor and
compressor unit are air cooled. Restrictions to or
insufficient air flow will cause overheating.
Never spray paint in a confined area with the air
compressor.
Operate the air compressor in well ventilated areas free
from obstructions. Equip areas with fire extinguishers
suitable for electrical fires. Do not leave nylon material
shirts or jumpers on the compressor.
Store paint thinners and other flammable liquids in
approved containers, in a secure location away from the
work area.
Minimum clearance 0.5m / Maximum ambient operating
temperature 45°C
This air compressor does not provide breathable air, the
air may be contaminated with mineral based oils and
other contaminants which poses the risk of serious lung
infection and or injury.
Spraying any material without the use of a face mask will
result in the ingestion of foreign substances.
Never try to provide breathing air or refill auxiliary
breathing apparatus using this compressor.
Never spray substances in a closed location occupied
by humans or animals always use a face mask when
spraying substances
Contact with hot surfaces, such as the cylinder head,
cooling fins or discharge pipe, could result in serious
burns.
These parts will remain hot for some time after the
compressor is shut down.
During operation, touch only the control surfaces of the
air compressor. Keep children and animals far away from
the air compressor at all times. They may not be able to
recognize the hazards of this product.
Allow the air compressor to cool before storage.
WARNING LABELS
All manuals and user guides at all-guides.com
