background image

USER MANUAL

JEFC050L08B Series

50L

 AIR  COMPRESSOR 

 2HP 

 8Bar 

 Direct Drive

www.jeffersontools.com

8

Label

Potential Hazard

Prevention 

Water directed at electrical connections or switches, or 
objects connected to an electrical circuit, could result in 
a fatal electrical shock.

Moisture or a liquid of any kind may conduct electricity 
and could result in a fatal electrical shock.

Note:

 

This equipment is not waterproof

.

Never attempt to clean the air compressor while it is 
running. Direct any water or spray away from electric 
outlets and switches.

Keep your air compressor out of the elements and well 
sheltered from rain, snow, dew, water or mist of any kind.

Do not use the compressor with the supply cord damaged 
or with poor quality connections

Operating the air compressor in an explosive 
environment could result in a fire.

Materials placed against or near the air compressor can 
interfere with its proper ventilation causing overheating 
and possible ignition of the materials. 

Improperly stored paint thinners could lead to accidental 
ignition. 

Good air flow is important as both the motor and 
compressor unit are air cooled. Restrictions to or 
insufficient air flow will cause overheating. 

Never spray paint in a confined area with the air 
compressor.

Operate the air compressor in well ventilated areas free 
from obstructions. Equip areas with fire extinguishers 
suitable for electrical fires. Do not leave nylon material 
shirts or jumpers on the compressor.

Store paint thinners and other flammable liquids in 
approved containers, in a secure location away from the 
work area.

Minimum clearance 0.5m  / Maximum ambient operating 
temperature 45°C 

This air compressor does not provide breathable air, the 
air may be contaminated with mineral based oils and 
other contaminants which poses the risk of serious lung 
infection and or injury.

Spraying any material without the use of a face mask will 
result in the ingestion of foreign substances.

Never try to provide breathing air or refill auxiliary 
breathing apparatus using this compressor.

Never spray substances in a closed location occupied 
by humans or animals always use a face mask when 
spraying substances

Contact with hot surfaces, such as the cylinder head, 
cooling fins or discharge pipe, could result in serious 
burns.

These parts will remain hot for some time after the 
compressor is shut down.

During operation, touch only the control surfaces of the 
air compressor. Keep children and animals far away from 
the air compressor at all times. They may not be able to 
recognize the hazards of this product.

Allow the air compressor to cool before storage. 

  WARNING LABELS 

 

Summary of Contents for JEFC050L08B Series





















Reviews: