JEFMAGDAUT35-230
•
JEFMAGDAUT35-110
AUTOMATIC MAGNETIC CORE DRILL
www.jeffersontools.com
5
2. Safety Guidelines
Important:
Ensure that you have read and
understand the information contained in this
manual before operating this equipment.
This appliance is not intended for use by persons
with reduced physical, sensory or mental
capabilities. The appliance must not be operated by
children or by any persons who have not been
instructed in the correct operation.
Children and pets should be kept away from the
working environment at all times during operation.
Please read these instructions carefully and
keep in a safe location for future reference.
Ensure that the manual is passed on should
ownership of the equipment change at any
time.
Contact your nearest Jefferson Dealer for advice on
correct usage, accessories (including compatible
detergents), servicing and replacement parts.
Do not modify this equipment for any other purpose
than those originally intended buy the manufacturer.
Ensure that the product is used in
accordance with the guidelines described
in this manual. Failure to do so can result in
personal injury and may void the warranty.
Ensure that you disconnect from the power supply
before carrying out any adjustments maintenance
or servicing on this equipment.
Working Environment
Ensure that the working environment is kept clear
and uncluttered. There should be plenty of light
available for safe operation.
Do not use this equipment in wet or windy
conditions or damp or wet conditions.
Do not use this equipment in the presence of
flammable liquid or gases.
Protect against electric shock by preventing
contact with earthed or ground surfaces (e.g. pipes,
radiators, cookers and refrigerators).
Jefferson recommend using a suitable residual
current device (RCD) for electrical safety when us-
ing this equipment.
Store idle tools when not in use in a dry and secure
location, out of reach of children.
Do not force the tool during operation or use
the equipment for a larger job than which it was
designed.
Personal Protection Equipment (PPE)
Do not wear loose clothing or jewellery during
operation incase they get caught in moving parts.
Wear protective hair covering to prevent long hair
getting caught up in the tool.
Ensure that suitable safety equipment is worn
during use these include:
•
Safety glasses
•
Ear defenders
•
Protective gloves
Wear a hard hat (if working with magnetic drill
above head height to prevent injury from ejected
slugs after cutting). Use a face or dust mask if
cutting operations create dust. Non-slip, steel
toecap footwear is recommended.
Cutters are sharp. Wear gloves when installing or
removing cutter from the arbor. Do not grab a
rotating cutter.
Keep tools sharp and clean for better and safer
performance. Do not use dull or broken cutters.
Follow safety instructions for lubricating and
changing accessories (always check compatibility
of annular cutters before use). Inspect tool cords
periodically and, if damaged, have them repaired
by a qualified electrician or an authorised
Jefferson Repair Centre.
