USER MANUAL
JEFMGNDR40-110 • JEFMGNDR40-230
40MM INDUSTRIAL MAGNETIC DRILL
www.jeffersontools.com
5
4. SAFETY GUIDELINES
4.1 General Safety
Important:
Ensure that you have read and understand the information contained in this manual before operating this equipment.
•
This equipment is not intended for use by persons with reduced physical, sensory or mental capabilities. The equipment must not be
operated by children or by any persons who have not been instructed in the correct operation.
•
Children and pets should be kept away from the working environment at all times during operation.
•
Please read these instructions carefully and keep in a safe location for future reference. Ensure that the manual is passed on should
ownership of the equipment change at any time.
•
Contact your nearest Jefferson Dealer for advice on correct usage, accessories (including compatible detergents), servicing and replacement
parts.
•
Do not modify this equipment for any other purpose than those originally intended buy the manufacturer.
•
Ensure that the product is used in accordance with the guidelines described in this manual. Failure to do so can result in personal injury and
may void the warranty.
•
Ensure that you disconnect from the power supply before carrying out any adjustments maintenance or servicing on this equipment.
4.2 Working Environment
•
Ensure that the working environment is kept clear and uncluttered. There should be plenty of light available for safe operation.
•
Do not use this equipment in wet or windy conditions or damp or wet conditions.
•
Do not use this equipment in the presence of flammable liquid or gases.
•
Protect against electric shock by preventing contact with earthed or ground surfaces (e.g. pipes, radiators, cookers and refrigerators).
•
We recommend using a suitable residual current device (RCD) for electrical safety when using this equipment.
•
This equipment should be grounded while in use to protect the operator from electric shock.
•
Store idle tools when not in use in a dry and secure location, out of reach of children.
•
Do not force the tool during operation or use the equipment for a larger job than which it was designed.
4.3 Personal Protection Equipment (PPE)
•
Do not wear loose clothing or jewellery during operation incase they get caught in moving parts.
•
Wear protective hair covering to prevent long hair getting caught up in the tool.
•
Ensure that suitable safety equipment is worn during use these include:
• Safety glasses
• Ear defenders
• Protective gloves
•
Wear a hard hat (if working with magnetic drill above head height to prevent injury from ejected slugs after cutting). Use a face or dust mask if
cutting operations create dust. Non-slip, steel toecap footwear is recommended.
•
Cutters are sharp. Wear gloves when installing or removing cutter from the arbor. Do not grab a rotating cutter.
•
Keep tools sharp and clean for better and safer performance. Do not use dull or broken cutters.
•
Follow safety instructions for lubricating and changing accessories (always check compatibility of annular cutters before use). Inspect tool
cords periodically and, if damaged, have them repaired by a qualified electrician or an authorised Jefferson Repair Centre.
