www.jeffersontools.com
User Manual
v.1.1
JEFPDB0350
4. UNPACKING
5.1 Carefully remove the drill from the packaging and examine it for any sign of damage that may have happened during shipping. Lay the
contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Jefferson Helpline (the
telephone number appears on the Title page) and do not attempt to use the lathe.
5.2 The packaging material should be retained at least during the guarantee period: in case the machine needs to be returned for repair.
5.3 Warning! Some of the packaging materials used may be harmful to children. Do not leave any of these materials in the reach of children.
5.4 If any of the packaging is to be thrown away, make sure they are disposed of correctly; according to local regulations.
5. ASSEMBLY
BASE & COLUMN
Select the base (Fig. 1) and align the column support over the large hole (Fig. 2).
Align the holes in the column support with those in the base and secure in place using the bolts and washers.
Using a spanner securely lighten all bots (Fig. 3).
We recommend mounting the base to stable surface for proper support. Slide the column into the column support (Fig.4).
Fig.1
Fig.2
Fig.3
Fig.4
Secure in place with 2 grub screws using the hex key (Fig. 5).
Fig.5
RACK & TABLE
2. Assemble the support and
rack onto the column, ensuring
the rack is positioned on the right
side of the column (when viewing
the product from the front)
(Fig. 7).
Fig.6
Fig.7
1. Install the rack into the table
support as shown (Fig. 6).
