7
USER MANUAL
V1.2
JEFSWMIT12-110
•
JEFSWMIT12-230
305mm
SLIDING COMPOUND MITRE SAW
3.3 Electrical Safety Information
All electrical connections must be done by a qualified electrician. Failure to comply may result in serious injury!
• All adjustments or repairs must be done with the miter saw disconnected from the power source.
Power supply
•
Warning:
this equipment must be connected to the correct power supply as indicated on the packaging and machine spec plate (230V or
110V) , Failure to connect in this way can result in injury from shock or fire.
Grounding
•
This machine must be grounded. If it should malfunction or breakdown,grounding provides a path of least resistance for electric current, to
reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Your machine must be properly grounded. Not all outlets are properly grounded. If you are not sure if your Outlet is properly grounded, have it
checked by a qualified electrician.
Warning:
to maintain proper grounding, do not remove or alter the grounding prong in any manner.
If not properly grounded, this machine can cause electrical shock, particularly when used in damp locations. To avoid shock or fire, if the
power cord is worn or damaged in any way, have it replaced immediately.
Extension cords
The use of any extension cord will cause some loss of power. Use the following table to determine the minimum wire size (a.W.G-american
wire gauge) extension cord. Use only 3-wire extension cords which have 3-prong grounding type plugs and 3-hole receptacles which accept
the tool’s plug.
For circuits that are further away from the electrical circuit box, the wire size must be increased proportionately in order to deliver ample volt-
age to the motor. Refer to fig.2 For wire length and size
Summary of Contents for JEFSWMIT12-110
Page 2: ......
Page 22: ...22 USER MANUAL V1 2 JEFSWMIT12 110 JEFSWMIT12 230 305mm SLIDING COMPOUND MITRE SAW NOTES...
Page 23: ......
