2
Read Before Installation
Warning
Thank you for your purchase of this JEGS Sandblast
Cabinet Dust Collection System.
Before installation, please be sure to verify that all of
the kit components have been received. Reference the
parts list on the previous page. If any components are
missing or damaged please contact customer service
at: 1.800.345.4545.
Installation of this dust collection system can be
completed with basic hand tools. If you are not
comfortable with this process please contact a trusted
service shop to perform the installation.
If you are having issues, or have questions
regarding the installation of this dust collection
system, please contact our technical support
department at: 1.800.345.4545.
Return Information:
Before modifying any of the parts
in this system, please trial fit.
Once this kit has been
modified it will not be accepted for return.
• Use caution when sandblasting parts that are
exposed to flammable materials. Do not al-
low fumes to enter the vacuum motor; this is an
explosion hazard.
• Wear a respirator when cleaning or emptying the dust
collection system. Avoid breathing the dust produced.
• Wear ear protection. This unit produces a high level
of noise.
• Do not operate the dust collection system if the inlet
is blocked.
• Do not operate in wet conditions.
• This unit is equipped with a 56 in. cord. If an ex-
tension cord must be used, do not exceed
50 ft. total length. An 18 AWG gauge wire or larger
extension cord is necessary.
• Uplug the dust collector when cleaning, changing
filter, or servicing.
