background image

 

 

WARNING 

 

DO NOT use additional attachments other than those recommended or provided by the manufacturer. 

 

Allow one (1) hour cool-down period before recharging. 

 

DO NOT exceed manufacturer's recommended specifications. 

 

Make sure that any electrical outlet, located in a potentially wet or moist area, and is to be used to charge the jump 
starter, is protected by a ground fault interrupt switch.  

 

Do not charge the jump starter on boat, boat ramp or docks since the electrical cords and outlets used for charging 
could cause severe electrical shock if they get wet. 
 

CAUTION 

 

Make sure fresh water & soap are available nearby in case battery acid contacts skin, eyes or clothing. If contact 
with battery acid occurs, rinse immediately and thoroughly with water, and then wash with soap and water.  

 

Get immediate medical attention if redness, irritation  or pain  is present. For eye contact flush eyes for at least 15 
minutes and get immediate medical attention.  

 

It is highly recommended that this product be operated by two persons.  Ensure that someone is available to give 
assistance, if needed. 

 

Wear complete eye and clothing protection. Do not touch eyes while working near battery.  

 

Do  not  operate  this  device  while  wearing  vinyl  clothing.  Static  electricity  sparks  maybe  generated  when  vinyl 
clothing is rubbed. 

 

Remove  personal  metal  items  such  as  rings,  bracelets,  necklaces  and  watches  while  working  with  a  lead-acid 
battery. It can produce a short-circuit high enough to cause a severe burn.  

 

Always keep the booster clamps in their storage holders to prevent sparking when recharging and when they are 

not in use. 

 

Never  allow  booster  clamps  to touch  together  or  to contact  the  same  piece  of  metal  to prevent  short  circuits  and 
arching. 

 

Avoid dropping metal tools onto vehicle battery. It might spark or short circuit  battery  or other electrical parts that 
may cause short circuits or explosion. 

 

Keep battery terminals clean. Be careful to keep corrosion from coming in contact with eyes. 

 

When using the 120V AC charger, pull on the plug and never pull on the cord when disconnecting. 

 

DO NOT recharge product battery with damaged chargers, replace them immediately.  

 

DO NOT place anything into the jump starter charging port except the provided plug from the charger unit.  

 

Use only the provided charger, cables and clamps. Unauthorized parts may damage the jump starter. 

 

This product has no consumer serviceable parts. 

 

This device contains a lithium battery  and must be disposed of properly. Contact  your local  government recycling 
authority for proper disposal. 

 

DO  NOT  attempt  to  remove  or  replace  the  battery  used  in  this  device.  When  battery  has  reached  the  end  of  its 
useful lifetime, take the entire unit to a battery recycling facility for proper disposal and/or battery replacement. 

 

This is not a toy. KEEP OUT OF REACH OF CHILDREN! 

 
 

FEATURES: 

Heavy-Duty Booster Clamps:

 700A starting/1400A 

peak current rated color-coded battery clamps 

Power Push Button:

 Powers USB, LED Lights, LED 

Charge Status % 

Professional Quality Cables:

 Color coded cables with 

extra thick oil resistant external cable insulation 
sheathing 

USB Port:

 5V/2.4A to power USB powered devices 

Booster Clamps Storage Holders:

 Prevents accidental 

sparking when cables are not in use 

LED Power Status & Charge Indicator:

 25%, 50%, 

75%, & 100% indicators, LED battery charge status 

LED Light:

 Provides long lasting portable lighting with 

emergency flasher functions 

12V & 24V Manual Buttons:

 Manually Select between 

12V & 24V batteries 

Convenient Charge Cord:

 120V AC charger for in home 

use 

 

                                         1-800-345-4545   jegs.com

 

Summary of Contents for 81952







Reviews: