Instructions
We would like to thank you for purchasing the JEGS Holeshot
Stadium Truck. Please read the following instructions for
best results. This manual contains many useful operating tips.
Please hold on to this manual for future references.
Step 1 - Charge the Battery Pack
• Please charge your battery completely before trying
to operate the truck.
Step 2 - Install Transmitter Batteries
• Install (4) AA batteries into the transmitter following
the polarity directed on the battery tray.
Step 3 - Install and Connect Truck Battery Pack
• Install your charged battery pack. Secure the battery
with the supplied velcro strap. Connect the battery
and speed controller plugs. Make sure they are
pressed together firmly.
Step 4 - Turn on Transmitter
• Turn on your transmitter by pushing the switch on
the left side of the steering wheel to the on position.
You will hear a short “beep” when its on and you
should see blue LED light stay on the right side of the
transmitter. If you hear short beep or beeping please
replace your transmitter batteries immediately before
operating your vehicle.
Step 5 - Turn on the Truck
• You can start the Holeshot by activating the
on/off switch.
• Turn the transmitter on before starting the truck.
Step 6 - Testing Operation
• Before driving the Holeshot, ensure that everything is
operating correctly. Make sure wheels turn left and
right and the throttle responds correctly.
Step 7 - Play and Have Fun
• Enjoy your Holeshot Stadium Truck.
Equipment
Included Items
• (1) JEGS Electric Radio-Controlled Stadium Truck
• (1) Transmitter [3-Channel]
Required Items [Not Included]
• (4) AA Batteries
• (1) NiMH [7.4 Volt] or Li-Po {2-Cell] Battery
• Deans Connector Plug
• 4500mAh/50C [Minimum]
• (1) Battery Charger
• Gear Grease
• Shock Oil [Silicone]
• Threadlocker
Tools
• The following tools are necessary to make assembly
& maintenance of your Holeshot Stadium Truck. Both
easier & more enjoyable. For your safety, exercise care
when using any hand tools, sharp instruments, or power
tools during construction. Always use safety glasses.
2.0 mm
Allen Wrench
Socket
Wrench
Philips Screwdriver
(Not Included)
2