Installation of the speaker’s grill
Precisely align and carefully press grill into the Velcro fasteners.
The Velcro fastener makes a crackling sound when it is closed correctly.
Our Tip:
If the panel cannot be pressed on completely at some points. . .
Cause:
the special form at these points and the resulting differences inmaterial cross section of the grill.
Solution:
the distance can be levelled out with spacers 3 under the Velcro disc.
(Spacers included with the screw kit)
6. Removing the grills:
The Velcro fasteners stick together very strongly! The grills can be removed anytime by carefully lifting them off.
Please, avoid any way of forceful yanking at the grills. It could break!
☞
Self-help and fault diagnosis
The following notes serve to help troubleshoot and eliminate faults or malfunctionson your own. If the follow
-
ing measures are not effective, please call us.
Info-Hotline Tel. 0049-7158/95699-0
What can it be if ...
possible cause/ solution
..it doesn’t sound right
·
wrong polarity on the subwoofers (see „speaker connection“)
· crosover circuit attached wrong (see „wiring diagram speaker connection“)
· door lining and moisture protection foil not cut out
(see. „installation of teh door lining“ and „installation of the speakers grill“)
· ampilifier doesn’t have enough power (see. „technical details“)
· amplifier connection
...it doesn’t fit correctly
· door panel customization (see „handling of the door lining“)
· installation of the panels on the door lining
.....grills do not hold
observe notes (see „installation of the speakers grill“)
vibrations
observe notes (see „insulation of the door lining“)
②
self-adhesive Velcro-strip
①
Velcro fastener
③
Washer M4 ø 20 as spacer
