BM-7
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI GROUP LTD is prohibited.
10
3.2. Installing and removing the milling head
Unplug the machine from the power source. To remove the milling head, unlock the
lever (
1
, Fig. 3) and unscrew the sleeve
(
2
,
3
). Through the hole in the body insert a
screwdriver
4
into the spindle to lock the spindle, and then use the special wrench to
unscrew the milling head (
5, 6
).
Fig. 3.
Removing the milling head
1
2
4
5
3
6
