Call the phone number where the unit is connected.
-After entering the phone number, the control panel will off hook after
the preset ringing times ( 7 ring).Subsequently, the voice guide of the
control panel prompts you to type the 4 digit Password (default
Password 1234). Type the Password for access to the control panel and
to follow the voice guidee to interact .
3.4 Remote management via phone control
For example, the
phone rings 7
times. After 7
times ring, the
panel will
automatically
off-hook.
Users to call
landline phones
.
Enter the user code
according to voice
prompting
X X X X
4.digit
the user
password
#
After you type the command the control panel asnwer :
succesfull operation
3.5 CMS Supervisory Istitute
The panel use the Ademco Contact ID to sent alarm information to the
alarm center. If the panel got the conf
i
rmation from the
CMS
center ,then
the dialer will stop otherwise
the panel will repeat alarm ( the max times
re-dialing the center number is 5). Alarm information will be display
and resolve by the alarm center computer software.
phone
3.6 Alarm procedure
Burglar zones and
perimeter zones are enabled/disabled by home/
away arming/disarming
. The
others zones
type ( Gas, fire, emergency)
are
always enable..
1
System arm, please press1
system disarm, please press2
inquiry the system status
please press 3
listen to the spot
hang up , please press 0
2
3
4
0
Jeiko
alarm system welcome your calling, please
input your password.
e18
BASIC SETTING & OPERATION
