Page 58
1.
Operating
represents the unit is running.
- If blue line is high, the unit is on (operating). If blue line is low, the unit
is off.
2.
Auto Tune
displays whether the unit performs Auto Tuning or not.
3.
Program
displays whether the unit is in programmable mode or not.
4.
Over Temp
. displays whether the unit is overheated or not.
5.
Water Low
displays whether water level is high or low.
- If water level is low, blue line is low position. Low position is under the
normal condition.
6.
Cooling
displays whether compressor works or not.
2.2.3.
Parameter
displays;
1.
PV
is an actual (present) temperature.
2.
SV
is a set temperature.
3.
Heat
is an output value of heating element.
4.
Run Time
indicates operating time after you press
button.
5.
Wait On Timer, Wait Off Timer
displays remaining time from a set time.
6.
Power Frequency
displays frequency of a current power.
3) Menu icon
○
1
○
2
○
3
○
4
○
5
○
6
○
7
○
8
○
9
○
10
○
11
○
12
○
13
○
1 File Open (Ctrl + O)
- To open saved graph.
○
2 File Save (Ctrl + S)
- To save proceeding graph.
○
3 Connect (Ctrl + C)
- To connect unit and PC via RS-232 communication.
○
4 Disconnect (Ctrl + D)
- To disconnect RS-232 communication.
○
5 Exit (Ctrl + X)
- To terminate Lab Tracer.
○
6 Print (Ctrl + P)
- To print saved graph or proceeding graph. (refer to p30)
○
7 Preview
- To preview before printing.
Summary of Contents for Lab companion SI-300
Page 67: ...Page 66...
Page 68: ...Page 67...
