14 Control
settings
S e t t i n g t h e D M X b a s e a d d r e s s
Use the Previous / Next buttons to select the
!$$1
option.
Use the Up/Down buttons to set the DMX base address from
to
. If
you hold down the button the address will count up or down, getting faster the
longer you hold it.
Press the Enter button to store the address setting.
The machine will automatically respond to a DMX controller whenever it is
connected.
S e t t i n g t h e o p e r a t i n g t e m p e r a t u r e
The machine provides three temperature settings which are required for different
types of JEM smoke fluid. See page 19 for details of the fluids available.
Use the Previous / Next buttons to select the
4%-2
option.
Use the Up/Down buttons to select
,/7
,
./1-
or
()'(
.
Press the Enter button to store the temperature setting.
fluid temperature
setting
Pro Steam Simulation
,/7
Regular DJ Fluid (DJ mix)
./1-
Pro Smoke Super (ZR mix)
()'(
Pro Smoke High Density (SP mix)
()'(
S e t t i n g t h e c o n t r o l p a n e l d i s p l a y b r i g h t n e s s
Use the Previous / Next buttons to select the
$)32
option.
Use the Up/Down buttons to select
,/7
,
./1-
or
()'(
.
Press the Enter button to store the brightness setting.
This function might be useful to make the display less obtrusive if the machine is
visible to audience.
S e t t i n g t h e m a s t e r - s l a v e l i n k m o d e
It is possible to control several machines from one digital remote. The machine
with the remote plugged into it becomes the Master. The other machines are
Slaves. The machines are interconnected with DMX cabling.
Use the Previous / Next buttons to select the
,).+
option.
Use the Up/Down buttons to select
1%#6
or
3%.$
.
Press the Enter button to store the link setting.
The machine should be set to
3%.$
only if it is running as a master. If running
as a slave, stand-alone or DMX controlled it should be set to
1%#6
.
A u x o p t i o n
This option is not currently used and has no effect on the machine.