Bottle
Output nozzle
Multi function
controller
Mains switch
Mains lead
Fluid compartment
ZR12-AL USER GUIDE
Machine Layout
PAGE 4
Analogue link
socket
Heat LED
Ready LED
MARTIN MANUFACTURING (UK) PLC
MARTIN MANUFACTURING (UK) PLC
ZR12-AL USER GUIDE
ZR12-AL Ducting Kit
The JEM ZR12-AL ducting kit enables the user to duct the smoke from the
machine to an area where the effect is required. This is done by using the JEM
ducting adaptor and a length of 100 mm (4“) ducting pipe. The length can be
anything from a couple of metres up to 20 metres or further. There are one or
two things to beware of when using smoke machines with ducting.
Firstly if there are bends to redirect the smoke they could cause condensation to
form. Also an air space must be provided between the output of the machine and
the ducting adaptor.
NOTE! Always use the recommended ducting adaptor and ducting
pipe, others may cause damage to the machine.
PAGE 9
Ducting adaptor
Jubilee clip
Ducting pipe