JEM ZR12-AL, Service Manual

8 

Specifications (DMX): 
 

Physical 

Length: 

500 mm 

Width: 

225 mm 

Height: 

165 mm 

Dry weight: 

11 kg 

Performance 

Max. smoke output (approx.): 

500 m

3

 per minute 

Max. operating time at full output (approx.): 

80 mins. 

Operating time: 

Continuous, automatic level adjustment 

Warm-up time: 

Approx. 7 minutes 

Control and Programming 

Control options: 

Remote control (supplied), DMX, 0-10 V analogue 

Remote control features: 

DMX Interface with manual push button 

DMX channels: 

1 

Protocol: 

USITT DMX512/1990 

Fluid System 

Fluid pump: 

Oscillating piston, high pressure 

Onboard fluid capacity: 

2.5 l 

Max. fluid consumption at peak output: 

75 ml per minute 

Construction 

Housing: 

Steel & aluminium 

Heat exchanger: 

1000 W, direct thermal protection 

Installation 

Orientation: 

Floor (No Flying Kit Available) 

Connections 

Remote control: 

5-pin DIN 

DMX data: 

3-pin locking XLR 

0-10 V analogue: 

5-pin DIN 

Power cable entry: 

Hard-wired 

Electrical 

AC power (EU models): 

220-240 V nominal, 50 Hz 

AC power (US models): 

110-120 V nominal, 60 Hz 

Main fuse (220-240 V power): 

5 AT (slow blow) 

Main fuse (110-120 V power): 

10 AT (slow blow) 

Typical Power and Current 

US model

110 V, 60 Hz: 

1070 W, 9.72 A 

115 V, 60 Hz: 

1169 W, 10.16 A 

120 V, 60 Hz: 

1273 W, 10.61 A 

EU model

220 V, 50 Hz: 

899 W, 4.08 A 

230 V, 50 Hz: 

982 W, 4.27 A 

240 V, 50 Hz: 

1070 W, 4.45 A 

Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal 

Maximum ambient temperature (Ta max.): 

40° C 

Exterior surface temperature, steady state: 

50° C 

Max. nozzle temperature: 

200° C 

Approvals 

EU safety: 

EN 50 081-1, EN 50 082-1 

EU safety: 

EN 60 335-1 (1995) 

Accessories 

Pro Smoke Studio (DX Mix) fluid, various sizes available

Pro Smoke Super (ZR Mix) fluid, various sizes available

Pro Smoke Super (Fragranced) fluid, various sizes available

Pro Smoke High Density (SP Mix) fluid, various sizes available

I-fog fluid, various sizes available

Ducting Kit (Including adapter and 5m of 4-inch (104mm) ducting): 

P/N 92625004 

DMX termination plug, 3-pin male XLR: 

P/N 91613017 

Ordering Information 

JEM ZR12 DMX, 120 V: 

P/N 92215111 

JEM ZR12 DMX, 240 V: 

P/N 92215110 

Service Info (internal only - do not publish) 

Cooling time before service or maintenance: 

20 minutes 

Minimum clearance around air vents: 

0.20 m