ZR33-DMX USER GUIDE
ZR33 Flying Kit
The ZR33 flying kit enables the machine to be fixed to rigging and ceilings for use
where the ZR33 is best situated in a flying position. The kit is supplied as standard with
the option of a drip pad for catching unwanted drips that can occur when smoke
machines are angled down.
NOTE! Always follow instructions when installing smoke machines. A safety
strap must be fixed from the rigging to the handle to ensure maximum safety..
PAGE 10
MARTIN MANUFACTURING (UK) PLC
ZR33 HI-MASS
ZR33 HI-MASS
Hanging Bracket
Safety Strap
ZR33-DMX USER GUIDE
Safety
•
•
•
•
•
•
•
•
•
•
Always use a JEM approved fluid, other fluids could be dangerous and could
cause damage to the machine.
Always check the voltage is correct for use with the machine, the voltage
setting is printed on the serial label.
Always read the user guide before operating the machine, smoke machines
need to be operated carefully to avoid risk.
Never touch the nozzle at the front of the machine, the nozzle can stay hot for
up to 10 hours.
Do not remove the cover or attempt to repair a faulty machine, an authorized
JEM dealer should be contacted in the event of a faulty machine.
Always use smoke machines in well ventilated areas, over use could affect
sufferers of asthma or other chest conditions.
Do not use the machine if there is a faulty mains lead or plug this could be
dangerous.
Never point the output directly at peoples heads, this is a high powered
smoke machine.
Always use approved accessories with this machine.
Do not spill fluid over the machine, if fluid is spilt clean with clean water and
contact an approved JEM dealer for advice.
Mains Lead Wiring Instructions
Brown = Live
Blue = Neutral
Green/Yelllow = Earth
Note! This Appliance must be earthed
PAGE 3
MARTIN MANUFACTURING (UK) PLC