Jema Autolifte JA1041OD, Operational Manual

８

2.

Insert the end of the probe into the engine oil inlet hole of the engine.(Fig.3) 

3.

Turn on the ball valve (Fig.01) 

4.

If waste oil only extracted into the

 cylinder. 

Please making sure the valve is closed. 

5.

If waste oil extracted to the 

oil tank

 through the cylinder. Please open the ball valve accordingly. Also 

the oil tank needs to be vacuum before extraction operation. 

6.

After finish extraction, turn off the extraction ball valve (Fig.01) 

Place the machine in a flat ground to avoid sliding during operation. 

Oil  temperature  higher  than  80  °  C  will  cause  seriously  damage  to  the  components,  in  worst  case  it 

could bring to machine failure. 

5) Ejection 

Oil ejection from cylinder to underside oil tank 

1.

When the oil level reached cylinder ‘STOP’ warning line, please empty the cylinder with oil ejection. 

2.

Turn  on  ball  valve

③，

at  the  same  time  turn  on  mini  ball  valve  from  the  hose

⑥

  to  release  cylinder 

pressure and oil drain into the oil tank. 

3.

Turn off valves

③

 and 

⑥

 after ejection. 

More about oil ejection from cylinder 

Fig.2 

Fig. 3 

Fig.4