WE ARE HERE TO SURPRISE!
11
4.4 Operation instructions
To raise the lift
1. Make sure that you have read and understood the operation manual before operation.
2. Drive and park the vehicle midways on the lift.
3. Place the four rubber pads under the prop-points of the vehicle and ensure that the
car’s gravity have fallen on the rubber
pads.
4. Connect the lift to the power supply
5. Press the UP button on the control box until rubber pads have touched the prop-points of vehicle.
6. Keep on pressing the UP button to lift the vehicle a bit higher from the ground and check if the vehicle is in a safe position.
7. Disconnect the power supply
To lower the lift
1. Connect the lift to the power supply.
2. Press the “UP” Button to make sure the safety lock is released
3. Press the DOWN button to lower the lift.
4. When the lift is in the lowest position, disconnect the power
