background image

                                                                                                                           

WE  ARE  HERE  TO  SURPRISE! 

 

1.

 Important safety instructions

 

1.1 Important notices 

Jema  Autolifte  will  offer  one-year  quality  warranty  of  the  lift,  during  which  any  quality  problem  will  be  properly  solved  to  the 

user's satisfaction. However, we will not take any responsibility for whatever bad consequence  that may result from improper 

installation and operation, overload running or improper ground conditions. 

This model is specially designed for lifting motor vehicles that weighs within maximum lifting capacity. Users are not allowed to 

use  it  for  any  other  purposes.  Otherwise,  Jema  Autolifte,  as  well  as  our  sales  agency,  will  not  bear  any  responsibility  for 

accidents or damages of the lift. Make sure to pay careful attention to the label showing the lifting capacity, attached on the lift, 

and never try to lift cars weighing more than the specified lifting capacity. Read this manual carefully before operating the lift so 

as to avoid economic loss or personnel casualty incurred by wrong operation. Without our professional advice, users are not 

permitted to make any modifications of the control unit or any other mechanical unit. 

     

1.2 Qualified personnel 

1.2.1 Only qualified staff, which has been properly trained, can operate the lift.   

1.2.2 Electrical connection must be carried out by a certified electrician.     

1.2.3 No unauthorized entry is allowed in the lifting area.   

 
1.3 Danger notices 

1.3.1 Do not install the lift on an asphalt surface. 

1.3.2 Read and understand all safety warnings before operating the lift. 

1.3.3 Calibration of the lift must be down after reading calibration instructions. 

1.3.4 Do not leave the controls while the lift is still in motion. 

1.3.5 Keep hands and feet away from any moving parts. Keep feet clear of the lift when lowering.   

1.3.6 Only properly trained personnel can operate the lift.   

1.3.7 Do not wear unfit clothes such as large clothes with flounces, tires, etc, which could be caught by moving parts of the lift. 

1.3.8 To prevent accidents, surrounding areas of the lift must be tidy and free from irrelevant matters.   

1.3.9 The lift is simply designed to lift the entire body of vehicles, with its maximum weight within the lifting capacity. 

1.3.10 Always insure the safety lock is engaged before any attempt to work near or under the vehicle. Never remove safety 

related components from the lift. Do not use the lift if safety related components are damaged or missing. 

1.3.11 Do not rock the vehicle while on the lift or remove any heavy component from vehicle that may cause excessive weight 
shift. 

1.3.12  Check  at  any  time  the  parts  of  the  lift  to  ensure  the  agility  of  moving  parts  and  the  performance.  Ensure  regular 
maintenance and if anything abnormal occurs, stop using the lift immediately and contact our dealers for help. 

1.3.13 Lower the lift to its lowest position and do remember to cut off the power source when service finishes. 

1.3.14 Do not modify any parts of the lift w

ithout manufacturer’s advice. 

1.3.15 If the lift is going to be left unused for a long time, users are required to: 

a. Disconnect the power source; 

b. Empty the oil tank;   

c. Lubricate the moving parts with hydraulic oil.   

 

Attention: For environment protection, please dispose the disused oil in a proper way.

 

Summary of Contents for JA2800S


















Reviews: