Subject to change without notice!
Installation and Operating Instructions ECOVARIO®114 D
11
3.3.2
CE conformity
ECOVARIO® servo amplifi ers are components that are intended to be built into electrical plant and machi-
nes for industrial use. Th e manufacturer of the machine is responsible that the machine or plant fulfi lls the
requirements of the EMC directive.
Th e servo amplifi ers have been tested by an authorized testing laboratory in a defi ned confi guration with the
system components which are described in this documentation.
Any divergence from the confi guration and installation described in this manual means that you will be
responsible for carrying out new measurements to ensure that the regulatory requirements are fulfi lled. For
servo amplifi ers with integrated safety function the conformity assessment is carried out according to the
EC machine directive 2006/42/EC.
Jenaer Antriebstechnik GmbH
•
Buchaer Straße 1
•
07745 Jena
Tel.: +49 (0) 3641/63376-0
•
Fax: +49 (0) 3641/63376-99
Internet:
www.jat-gmbh.de
•
E-mail:
info@jat-gmbh.de
EG – Konformitätserklärung
EC – Declaration of Conformity
Hiermit erklären wir / Herewith we
Jenaer Antriebstechnik GmbH, Buchaer Str. 1, 07745 Jena, Deutschland
in alleiniger Verantwortung, dass das gelieferte Modell / declare under our own responsibility that the supplied
model of
Servoverstärker mit Sicherheitsfunktion ECOVARIO
®
114 xR-xx-xxx-xxx
Servo amplifier with safety function
den Anforderungen der
EG-Maschinenrichtlinie 2006/42/EC
entspricht.
complies with
EC Machinery Directive 2006/42/EC
Hierfür wurden die folgenden harmonisierten Normen angewendet / For this, the following harmonized standards
were applied:
EN 60204-1:2006, EN ISO 13849-1:2008
EN 61800-5-2:2007, EN 61800-5-1 / VDE160
EN 61800-3:2004
Das Produkt ist nach Artikel 2, Buchstabe c der Richtlinie
2006/42/EG als Sicherheitsbauteil definiert. Es ist ausschließlich für
den Einbau in eine Maschine bestimmt. Die Inbetriebnahme ist so
lange untersagt, bis die Gesamtmaschine, in die das Produkt
eingebaut werden soll, den Bestimmungen der Richtlinie
2006/42/EG entspricht.
Die Sicherheitshinweise der Betriebsanleitung sind zu beachten.
The products are defined as safety components according to directive
2006/42/EC. They are exclusively intended for installation in machines.
Operation is prohibited until it has been determined that the machines
in which these products are to be installed, conform to the directive
2006/42/EC.
The safety instructions of the manual are to be considered.
Ort, Datum der Ausstellung Geschäftsführer Dokumentationsverantwortlicher
(Place and date of issue) (General Manager) (Responsible for documentation)
Jena, 17.01.2013
Dipl.-Ing. (FH) Stephan Preuß Dipl.-Ing. Gerald Bobe