Subject to change without notice!
Installation and Operating Instructions ECOVARIO®114 D
15
4.4
Suitable types of motors
With ECOVARO® servo amplifi ers various types of motors can be operated. Rotative and linear 2-phase mo-
tors of the motor ranges ECOSTEP®, ECOLIN® and ECOVARIO® as well as 3-phase and DC motors can be
driven. Th e motors must be equipped with encoders for position and speed control. Incremental encoders,
SINCOS encoders and absolute encoders can be evaluated.
It is not possible to drive motors with resolvers as measuring system.
Th e techical data in this manual refer exclusively to the encoder commutated synchronous motors men-
tioned in chap. 4.4.1 to 4.4.3.
If you want to drive DC motors with ECOVARIO® please contact our technical service (see www.jat-gmbh.
de/distribution).
4.4.1
ECOSPEED motors
Th e motor ranges 60B and 80B contain rotative 2-phase, encoder-
commutated low-pole synchronous motors with fl anges of 60 mm
and 80 mm and holding torques between 0.6 and 3 Nm. Th e motor
ranges 60C and 80C are 3-phase with holding torques between 0,93
and 3,5 Nm.
For technical data and accessories for the motors see our product
catalogue „ECOVARIO®-/ECOMPACT®-/ECOSTEP® Drives“ or
our web site www.jat-gmbh.de.
Fig. 4.2: Motor ranges 60B and 80B
4.4.2
ECOSTEP® motors
Th e motor ranges 17H and 23S contain rotative 2-phase, encoder
commutated, high-pole synchronous motors with fl anges of 42 mm
and 56 mm and holding torques between 0.2 and 3.8 Nm.
For technical data and accessories of the motors see the product
catalogue „ECOVARIO®-/ECOMPACT®-/ECOSTEP®-Antriebe“ or
our web site www.jat-gmbh.de.
Fig. 4.3: Motor ranges 17H and 23S