TROUBLESHOOTING
Doesn’t come on
Check for blown fuse,
check cord, electrical
outlet.
Can’t smell ozone or
not as strong as it used
to be
Clean the generator
plate or replace it if
more than two years
old.
Not pushing enough
air
Clean foam filter on
left side
The ceramic generator plates will need to be replaced every year or two, depending on
use. (A noticeable decrease in ozone output will occur that is not cured by cleaning.)
These can be ordered from Jenesco Inc.
CAUTION: HIGH VOLTAGE POWER SUPPLY.
NEVER REMOVE COVER WITHOUT FIRST UNPLUGGING THE UNIT
DO NOT OPERATE CONTINUOUSLY IN
INHABITED SPACES.
Although ozone is a healthful constituent of clean fresh air, high concentrations for
prolonged periods can produce respiratory irritation and distress. This unit is capable of
producing ozone concentrations that are unsafe when used in confined spaces. Do not
direct the output at your face for prolonged periods of time.
WARNING
Use normal precautions, as with any electrical appliance, to avoid possible shock. Avoid
exposure to sources of moisture. Use properly grounded electrical outlets.
Specifications:
Electrical
120 V 40 watts, 60 HZ
Fuse
Type 239, 250 Volt, 3 Amp
Fan
38 CFM
Ozone output 2000 mg/hr
Replacement plates 3.5” x 5.5” Type FM ( Qty 2)
Compliant with UL ( 867, 2nd Edition) - CSA ( 187 1st Edition )
