10
Learning to Use the Lean Clean 360 Cleaning System
Optional Features
The following sections describe
optional
equipment available for the Lean
Clean 360-1. Check your Lean Clean 360 or your purchasing specifications to
determine which options your machine includes.
Ultrasonic Generator and Transducer
The tubular ultrasonic transducer and generator can provide ultrasonic energy
in the wash chamber during wash and rinse cycles. Available frequencies
include 25 kHz, 40 kHz, or other frequencies by special order. An interlock
automatically stops the transducer to protect it from damage if there is no
liquid in the wash chamber. The ultrasonic generator is mounted above the
operator control panel, enables variable power control, autotuning of
frequency to process variables, and complies with FCC Part 18 and CE mark.
An OEM user manual is supplied with this option.
Fresh Water Spray Rinse
The fresh water spray rinse maximizes removal of washing chemistry by
providing a fresh water rinse after the rinse tank rinse cycle. The fresh water
rinse option includes an additional water line, separate spray bar in the wash
chamber, and a program-controlled solenoid valve. Fresh water rinse water
flows to the rinse tank, and the overflow flows to the drain line.
Rocking Drive
Provides rocking motion of the basket from 0 to 75 degrees on each side of
center to enhance cleaning of delicate parts or parts that that cannot be
rotated. The system enables control of speed and degree
of rocking action.
Oil Separator (Coalescing Type)
The coalescing oil separator extends bath life by continually removing oils
from the wash solution. The oil separator consists of a free-standing unit with
an air-drive pump to pump solution from the
wash tank. Clean solution flows by gravity back to the wash tank.
