12
Learning to Use the Lean Clean 360 Cleaning System
Description
of Components
Overview
The Lean Clean 360 includes these components (Figure 1):
Basket
—
holds parts during washing. One basket is provided with the
machine. Several basket designs are available as options.
Loading door
—
provides access to the washing chamber and seals the
chamber. The machine will not run with the door open. When running, the
door will not open until the cleaning cycle is complete.
Forklift pockets
—
supports the Lean Clean and enables forklifts to move the
machine.
Ultrasonic generator and transducer (optional)
—
generates mechanical
sound waves in the washing chamber during washing or rinsing to enhance
the cleaning process. The ultrasonic generator is located on top of the control
panel; the transducer (not shown) is located inside the washing chamber).
Access doors
—
two side doors and one back door with latching handles
provide access to the piping, tanks, and automated controls for maintenance.
Other panels are removable but require removal of fasteners first.
Main power disconnect
—
r
emoves all power from system components.
Operator interface
—
t
ouch screen monitor enables process monitoring,
process control, and program selection and modification.
Controls
—
power, start, stop and rotation speed control enable operators to
control the Lean Clean.
Electrical control panel
—
houses electrical and control equipment.
