P A L E R T A N D P X - 0 1 S Y S T E M S W E B
C O N F I G U R A T I O N
USER MANUAL
Jenlogix
Version 2 26/01/2018
© Jenlogix 2017 Jenlogix
Page 36 of 46
6. CHANGE VOICE ALARMS
On PX-01 devices it is possible to change the alarm messages. This requires using on the laptop/desktop an
ftp client like Winscp (
https://winscp.net/eng/index.php
) or Filezilla. Winscp shown below.
•
To change voice alarms, Connect using same user name / password as described in section 5
above with port 22. Then go to folder Desktop/vAlert8/
bin
.
•
Voice alarms are stored in uncompressed .wav format. Optional default voices for Chinese and
English are stored in the wavChinese and wavEnglish subfolders.
•
Default files can be copied from the subfolders to the bin folder replacing existing files.
•
Optionally user can record their own voice alarms to replace the existing files using same file names.
e.g. .wav file used for Intensity now are named Intensity_
x
.wav where x is 1 to 12.