15
LIGHTING ILLUSTRATIONS
ROTISSERIE BURNER & SEARING SIDE
BURNER LIGHTING
MAIN BURNER LIGHTING
1.
Open the top cover or lid
.
1. Push and turn rear burner knob slowly to
“IGNITE / ON” setting, hold in until th
burner is lit up, continue to press and
hold for 15 seconds and release. You
should hear a “clicking” sound if the
electronic ignition system is working
properly. The burner should ignite wi
e
thin
atch
lighting instructions on Page 16.)
4 seconds.
(If burner does not ignite follow m
2. Turn the main burner control knobs to the
“IGNITE / HI” setting. Push the control knob
until the burner ignites; you should hear a
“clicking” sound if the electronic ignition
system is working properly. The burner
should ignite within 4 seconds (if burner does
not ignite follow match lighting instructions on
Page16).
3. Once the burner ignites, adjust the
temperature level as desired.
2. Push and turn searing side burner knob to
“IGNITE / HI” setting, hold in until the
burner ignites. The burner should ignite
within 4 seconds. After ignition, continue to
press and hold for 15 seconds and release.
(If burner does not ignite follow match
lighting instructions on Page 16.)
