Jenn-Air EDR3RXD1, Use & Care Manual

8 | INTRODUCTION

INTRODUCTION

2.

Turning Off Cooling

Press the FRIDGE or FREEZER touch pad.

NOTE:

Press and hold the COOLING OFF 

touch pad for 3 seconds.

To turn off the power completely, use 

the power ON/OFF switch located 

behind the top grille. Refer “Power On/

Off Switch.”

3.

Viewing the Temperature in

Degrees Celsius

Press °C touch pad. To redisplay degrees

Fahrenheit, press °F touch pad.

NOTE:

If the freezer temperature is below

zero, the negative sign next to the freezer

display will light up. This is normal.

4.

Adjusting Controls

NOTE: 

Wait at least 24 hours between 

adjustments. Recheck the temperatures before 

other adjustments are made.

TO ADJUST SET POINT TEMPERATURES:

■

Press the FRIDGE or FREEZER touch pad,

and then press the Plus (+) or Minus (-)

touch pad until the desired temperature is

reached.

■

Press the SAVE touch pad to program the

desired temperature.

NOTE: 

The set point range for the freezer is -5°F 

to 3°F (-21°C to -16°C). The set point range for 

the refrigerator is 34°F to 42°F (1°C to 6°C).

CONDITION/REASON:

TEMPERATURE 

ADJUSTMENT:

REFRIGERATOR too 

cold 

Not set correctly for 

conditions

REFRIGERATOR 

Control 1° higher

REFRIGERATOR too 

warm  

High use or room very 

warm

REFRIGERATOR 

Control 1° lower

FREEZER too cold 

Not set correctly for 

conditions

FREEZER Control 1° 

higher

FREEZER too warm/

too little ice  

High use or heavy ice 

use

FREEZER Control 1° 

lower

5.

Max Ice

The Max Ice feature speeds up the ice 

production rate to assist with periods of heavy 

ice usage.

■

Press OPTIONS, and then press MAX ICE

to turn on the Max Ice feature. Max Ice

will remain activated for 24 hours unless

manually turned off.

NOTE: 

The temperature display for the 

refrigerator and freezer compartments will 

remain at the user’s set points, but the actual 

temperature of the freezer compartment will 

drop to -5°F (-21°C), while the Max Ice feature is 

enabled. After 24 hours, the freezer will return 

to the previous temperature set point.

6.

Max Cool

The Max Cool feature assists with full grocery 

loads, temporarily warm room temperatures, or 

during heavy door opening use.

■

Press OPTIONS, and then press MAX COOL

to turn on the Max Cool feature. Max Cool

will remain activated for 24 hours unless

manually turned off.

NOTE:

 The temperature display for the 

refrigerator compartment will remain at the 

user’s set point, but the actual temperature of 

the Fridge compartment will drop to 34°F (1°C), 

while the Max Cool feature is enabled. After 24 

hours, the refrigerator returns to the previous 

temperature set points.

7.

Sabbath Mode

Sabbath mode is designed for the traveler 

or for those whose religious observances 

require turning off the lights and ice maker. 

By selecting this feature, the temperature set 

points remain unchanged, the ice maker will 

be disabled, the interior lights will turn off, and 

the audio tones are muted. For most efficient 

refrigerator operation, it is recommended 

to exit Sabbath mode when it is no longer 

required.

■

Press the SABBATH touch pad to turn on

Sabbath mode. This feature will remain on

until Sabbath is pressed again.

NOTE: 

If the Max Cool or Max Ice feature

has been selected prior to turning on

Sabbath mode, Max Cool and Max Ice will

be automatically canceled upon entering

Sabbath mode.

8.

Filter Reset

Refer “Water Filter Indicator” in the “Water 

Filtration System” section.