GETTING STARTED | 13
GETTING STARTED
GET
TING S
TAR
TED
TO REMOVE THE GRILLE PANEL FROM THE
REFRIGERATOR:
1.
Open the door(s).
2.
Place both hands under the grille panel,
grasping the bottom edge between your
fingers and thumbs.
3.
Pull the grille panel straight out until the
grille stops. Then, lift up on the grille panel
to remove.
POWER ON OR OFF SWITCH
1.
Remove the top grille panel.
2.
Press power switch to the On or Off
position.
3.
Replace the top grille panel.
IMPORTANT:
Be sure the power switch is set to
the On position after cleaning refrigerator or
changing light bulbs.
A
A. Power switch
REFRIGERATOR USE
Before you move your refrigerator into its final
location, it is important to make sure you have
the proper electrical connection.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similar qualified person. Do not
use a cord that shows cracks or abrasion
damage along its length or at either the plug or
connection end.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
LOCATION REQUIREMENTS
IMPORTANT:
This appliance is intended to
be used indoor for household and similar
applications such as:
■
Staff kitchen areas in shops, offices and
other working environments.
■
Farm houses and by clients in hotels,
motels and other residential type
environments.
■
Bed and breakfast type environments.
■
Catering and similar non-retail applications.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such
as gasoline, away from refrigerator.
Failure to do so can result in death,
explosion, or fire.
Summary of Contents for EDR3RXD1B
Page 2: ......
Page 47: ...47 NOTES ...
