JENN-AIR
®
DETAILED PLANNING DIMENSIONS
2 of 2
8997AdZw217
IMPORTANT:
Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information.
Refer to the Installation Guide
before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved.
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 5
13
⁄
32
" x 21"
OPENING/CLEARANCE DIMENSIONS
D*
G
E
A
B
B
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
E
A
B
B
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
E
A
B
B
I
K
J
H
C
e
F
Side
Cabinet
H
MODEL #
JEF3115G
in
cm
A
Width of combustible area above
cooking surface (min.)
15
38.1
B
Width from cooktop to fixed wall or
other combustible material (min.)
6
15.2
C
Width to outer edge of outlet (max.)
9
23.0
D*
Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.)
30
76.2
E
Height to bottom of uncovered wood or
metal cabinet (min.)
18
45.7
F
Height to top edge of outlet (min.)
7
17.8
G
Depth of upper cabinet
13
33.0
H
Depth from cutout to wall (min.)
2
5
⁄
8
6.7
I
Width of cutout (recommended)
14
3
⁄
8
36.5
J
Depth of cutout (recommended)
20
3
⁄
8
51.8
K
Depth from cutout to front of countertop
2
5
⁄
16
5.9
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than
1
⁄
4
" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
FRONT VIEW
ELECTRICAL REQUIREMENTS
A 240 Volt, 60 Hz, AC only 15-amp fused, grounded electrical circuit is
required. A time-delayed fuse or dedicated circuit is recommended.
A grounded 3-prong outlet should be located in the back of the cabinet.
Do not use an extension cord.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout
• If cabinet has a drawer, allow a 5
1
⁄
2
" (14.0 cm) minimum clearance
between countertop and top of drawer.
TOP VIEW
SIDE VIEW
