20
Install FreshFlow™ Air Filter
An air filter is 15 times more powerful than baking soda at
reducing common food odors inside the refrigerator.
On some models, your refrigerator’s accessory packet includes
an air filter which must be installed prior to use.
Installing the FreshFlow™ Air Filter
Install the air filter behind the vent cover, located on the rear wall
near the middle of the refrigerator.
1.
Remove the air filter from its packaging.
2.
Pull out plastic cover over the vented cover.
NOTE:
When cover is removed for the first time, a small foam part
the size of the filter will need to be removed and discarded.
3.
Snap filter into place, close cover.
A. Air filter
Replacing the FreshFlow™ Air Filter
The disposable air filter should be replaced every 6 months. Some
air filters have an indicator that replacement is needed.
To order a replacement air filter, contact us. See the “Accessories”
section in the Use and Care Guide for information on ordering.
1.
Open cover and remove the used air filter by squeezing in on
the side tabs.
2.
Install the new air filter using the instructions in the previous
sections.
Sensitivity
to Ethylene
Ethylene
Production
Apples
High
Very High
Asparagus
Medium
Very Low
Berries
Low
Low
Broccoli
High
Very Low
Cantaloupe
Medium
High
Carrots
Low
Very Low
Citrus Fruit
Medium
Very Low
Grapes
Low
Very Low
Lettuce
High
Very Low
Pears
High
Very High
Spinach
High
Very Low
A
Installing the Produce Preserver
For your convenience, the suction-mounted produce preserver
can be installed in either the crisper or the refrigerated drawers.
CAUTION: IRRITANT
MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES
FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with cleaning products containing ammonia,
bleach or acids. Do not get in eyes, on skin or clothing. Do
not breathe dust. Keep out of reach of children.
FIRST AID TREATMENT:
Contains potassium
permanganate. If swallowed, call a Poison Control Center or
doctor immediately. Do not induce vomiting. If in eyes, rinse
with water for 15 minutes. If on skin, rinse with water.
1.
Wash the interior of a drawer with a solution of mild dish soap
and warm water and dry thoroughly.
2.
Find the package containing the Produce Preserver inside the
refrigerator and install the Produce Preserver into the drawer,
according to the instructions provided in the package.
Replacing the Produce Preserver
The disposable packet(s) should be replaced every 6 months or
when the status indicator changes completely from white to red.
To order replacements, contact us. See the “Accessories” section
for information on ordering.
1.
Remove the used packets from the produce preserver
housing.
2.
Remove the used status indicator.
3.
Install the replacement packets and status indicator using the
instructions included in the package.
Install Produce Preserver
(on some models)
The produce preserver absorbs ethylene to slow the ripening
process of many produce items. As a result, certain produce items
will stay fresh longer.
Ethylene production and sensitivity varies, depending on the type
of fruit or vegetable. To preserve freshness, it is best to separate
produce with sensitivity to ethylene from fruits that produce
moderate-to-high amounts of ethylene.