25
Calibrate Measured Fill
Household water pressure may affect the accuracy of the
Measured Fill feature. So, for optimum performance of your
water dispenser, you must first calibrate Measured Fill.
IMPORTANT:
■
Flush the water system before calibrating Measured Fill.
■
For best results, calibration should be performed when water is
not being used in the house.
1.
Place a sturdy measuring cup (1-cup [237 mL] size) on the
dispenser tray centered in front of the ice/water dispenser
paddle.
NOTE:
Depending on your model, a measuring cup may be
provided.
!
Calibration
!
Door
Ajar
!
Replace
Filter
!
"#$#!
!
%&#'#(')!"#$#
!
!
Order Filter
!
a1 oz = b1 L
!
a2 oz = b2 L
!
a3 oz =
b3 L
!
Dispense
!
A. Water dispenser paddle
B. Ice dispenser paddle
C. Measuring cup (1 cup)
Ensure that you do not have any Measured Fill preset selected.
2.
Touch and hold the Measured Fill button for 3 seconds to
enter into Calibration mode. The Calibration and Measured
Fill icons will illuminate and remain lit while the Measured Fill
feature is being calibrated.
NOTE:
You may touch MEASURED FILL to exit at any time in
Calibration mode. The Calibration and Measured Fill icons will
disappear.
3.
Press and hold the water dispenser paddle, as needed, to
dispense water to the 1-cup fill line in the measuring cup.
NOTE:
If overfilling or spilling occurs, discard the water and
restart the calibration process.
4.
When 1 cup of water has been correctly dispensed into
the measuring cup, touch MEASURED FILL to confirm the
calibration.
5.
When Measured Fill calibration has been confirmed, the
Calibration icon will disappear and the display will return
to the home screen.
B
A
C
Save Favorite Fill
Household water pressure may affect the accuracy of the Favorite
Fill feature. So, for optimum performance of your water dispenser,
you must first calibrate Measured Fill.
IMPORTANT:
■
Flush the water system before saving Favorite Fill.
■
For best results, calibration should be performed when water is
not being used in the house.
1.
Place a preferred-size cup on the dispenser tray centered in
front of the ice/water dispenser paddle.
2.
Select either Favorite 1 or Favorite 2, and then touch and
hold the Favorite Fill button for 3 seconds to enter into Saving
mode. The Favorite Fill icon will illuminate and remain lit while
the Favorite Fill feature is being saved.
NOTE:
You may touch FAVORITE FILL to exit at any time in
Saving mode and the display will return to the Home screen.
3.
Press and hold the water dispenser paddle, as needed, to
dispense water to the preferred-size cup.
NOTE:
If overfilling or spilling occurs, discard the water and
restart the saving process.
4.
When the preferred amount of water has been correctly
dispensed into the cup, touch the Favorite Fill button to
confirm the favorite amount.
5.
When Favorite Fill amount has been confirmed, the display
will return to the home screen.
Dispensing
Touch CUBED ICE or CRUSHED ICE for your ice selection.
NOTES:
■
For crushed ice, cubes are crushed before being
dispensed. This may cause a slight delay when dispensing
crushed ice. Noise from the ice crusher is normal and
pieces of ice may vary in size.
■
When changing from crushed to cubed, a few ounces of
crushed ice will be dispensed along with the first cubes.
