7
Shelf Height Adjustment
Shelf height can be adjusted by changing the adjustable shelf
mounts between their vertical and horizontal positions.
■
Carefully lift the shelf off the shelf mounts and turn the flipper
to the desired orientation.
■
Repeat for remaining shelf mounts.
■
Ensure the shelf is properly seated on the shelf mounts.
■
Continue to turn the alignment screw until the tops of the door
are aligned.
NORMAL OPERATING SOUNDS
Your new French door bottom mount refrigerator has been
designed to optimize energy efficiency and better regulate
temperatures to match cooling demand.
You may notice that it operates differently from your previously
owned refrigerator.
It is normal for the high-efficiency compressor to run for extended
periods of time at varying speeds in order to consume only the
energy necessary for optimum efficiency.
In addition, during various stages of the cooling cycle, you may
hear normal operating sounds that are unfamiliar to you.
REFRIGERATOR CONNECTIVITY FEATURES
(on some models)
Wi-Fi connectivity allows your Smart Refrigerator to connect to the Internet and interact with the JennAir
®
app from your smartphone or
mobile device. This connection opens up several Smart options to you — options intended to save you valuable time and energy. Refer
to the “Troubleshooting—Connected Models” section of this Use & Care Guide, check any connection instructions for your specific
router, and refer to alternate instructions at
www.jennair.com/connect
or call
1-877-559-2603
.
NOTE:
Requires Wi-Fi and account creation. App features and functionality subject to change. Subject to Terms of Service available at:
www.jennair.com/connect
. Data rates may apply.
SMART FEATURES
Smart Features help make your everyday a little more efficient
by letting you remotely monitor, manage, and maintain your
refrigerator.
Remote Temperature Control
What it does:
Allows you to control your refrigerator remotely
from your mobile device via the JennAir
®
app.
What it does for you:
Lets you control temperatures in your
refrigerator, freezer, and temperature-controlled pantry remotely—
not just when you are standing in front of it.
Water Filter Status
What it does:
Gives you a look at the life remaining for your water
filter before replacement is needed. This allows you to reset the
filter.
What it does for you:
Helps you be more efficient in planning
for ordering and replacing filters.
Auto Reorder App
What it does:
Allows you to order replacement filters,
consumables, and accessories via the JennAir
®
app for
delivery directly to your home.
What it does for you:
Simplifies ordering correct water and air
filters—no trips to the store searching for the correct filters.
Door Ajar Alert
What it does:
Sends you a notification when one of the doors of
the refrigerator has been left open.
What it does for you:
Alerts you to door-open status so you
can close the door(s) or call home to ask someone else to close
door(s) before over-temperature situation arises.
Power Outage Alerts
What it does:
Sends you a notification when power
to your refrigerator is disconnected, returns, and when
the highest temperature is reached in the refrigerator
and freezer compartments during the power outage.
What it does for you:
Alerts you to power status and duration
of outage to provide input regarding disposition of refrigerator/
freezer contents.
