COMPONENT ACCESS
Four Door Bottom Mount
n
4-25
Accessing Ice Maker and Dispenser Components (Continued)
Dispenser
1.
Insert a small screwdriver to press black tabs on underside of
UI in these 3 locations to remove user interface (UI) assembly.
2.
Pull out and lower UI, then disconnect board from wire
harness connectors to remove.
3.
To remove ice door assembly, remove the two screws securing
assembly to refrigerator door.
4.
Disconnect dispenser hose by removing hose from locater
channel and then by locating and depressing the tab to
release.
5.
Pull out the assembly to service.
A
A. Screws
B
A
A. Tab
B. Locater channel