Testing Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing,
unless testing requires power and/or gas.
©2005 Maytag Services
16022089
17
Oven Control Testing Procedures
Changing factory set default options: 1. Press
Setup Options
and the desired pad simultaneously (see table).
2. Press
Autoset
to change the option.
3. Press any pad except
Cancel
to accept the change.
4. Press
Cancel
to cancel the operation.
Control Component
Test
Procedure
Results
EOC II
Oven temperature
adjustment
Press
Bake
pad and enter 550° F (288° C). Press
and hold
Bake
pad until
TEMP ADJ
displays.
Press
Autoset
pad to adjust oven in 5° F (-15° C)
increments, from -35° F (-37° C) to 35° F (2° C).
While increasing or decreasing oven
temperature, this does not affect self-
cleaning temperature.
EOC II
End-of-Timer
Reminder beeps
Press Setup Options and the applicable timer pad
(Timer 1 or Timer 2) simultaneously.
Selects the number of beeps emitted
when a timed bake cycle ends.
EOC II
Control Lock
Press Setup Options and the Control Lock pad
(also the 1 pad) simultaneously.
Press Autoset to select option (enable or
disable). The timer, clock and oven light
are operational.
EOC II
Twelve Hour off/
Sabbath mode
Press Setup Options and the 12 Hour Off pad
(also the 2 pad) simultaneously.
Disables the normal 12-hour shutoff,
allowing the oven to operate indefinitely.
EOC II
Sound Level
(Beeper Volume)
Press Setup Options and the Sound Level pad
(also the 3 pad) simultaneously.
Press Autoset to select setting (I lowest
through IIIIIIII 8 highest).
EOC II
24-Hour Clock
Press Setup Options and the 12/24 Hour Clock
pad (also the 4 pad) simultaneously.
Press Autoset to select option (12-hour
time or 24-hour time).
EOC II
Scroll Speed
Press Setup Options and the Scroll Speed pad
(also the 5 pad) simultaneously.
Press Autoset to set speed of displayed
messages (slow, medium, fast).
EOC II
End-of-Cook-Time
Signal
Press Setup Options and Cook Time Beeps pads
(also the 6 pad) simultaneously.
Press Autoset to set the number of
beeps emitted at the end of a "clock-
controlled" cook cycle.
EOC II
Temperature Display
Press Setup Options and the Temp C/F pad (also
the 7 pad) simultaneously.
Press Autoset to select option
(°F or °C).
EOC II
Language Display
Press Setup Options and the Language pad (also
the 8 pad) simultaneously.
Press Autoset to select option
(English, French or Spanish).
EOC II
Factory Default
Press Setup Options and the Default pad (also the
9 pad) simultaneously.
Press Autoset to reset clock to factory
settings.
EOC II
Clock Display
Press Setup Options and the Display On/Off pad
(also the Clock pad) simultaneously.
Press Autoset to select clock display (on
or off).
EOC II
Test Access
Press and hold Cancel and Broil pads for 3
seconds at power up or within 5 minutes of power
up mode. See "Quick Test Mode."
Allows access to each function for
testing purposes.
Summary of Contents for JGS8750ADB
