• Some European style cabinets are equipped with vinyl drawer and
door fronts. The vinyl may not be designed to withstand the heat
produced by the normal operation of the self cleaning range.
Discoloration or delamination may occur. To avoid possible damage,
Maytag recommends increasing the 30" cabinet opening to 31 1/4"
minimum and using a heat shield kit #CABKIT V. The countertop
cutout must remain 30".
• Gas requirements: Gas supply line should be 3/4". Install a manual
shutoff valve in an accessible location in the gas line external to this
appliance for the purpose of turning on or shutting off gas to the
appliance. The appliance is shipped from the factory equipped for use
with natural gas and can be converted to LP. The maximum gas
supply pressure for both LP and natural gas is 14" WC. Minimum
Pressure for Natural gas is 6" WC. Minimum Pressure for LP gas is 11"
WC.
Kits:
• UXA9007ABB/Q/W: side panels.
• JXA9112AAP: Backsplash.
• JXA9130AAP: Backsplash.
30" countertop
opening
Cutout opening
Slide-in installation
(not to scale)
23 1/4"
Recommended.
From countertop
front to rear cutout
36"
countertop height
30"
Cabinet opening
25" Normal
countertop depth
24"
Cabinet depth
You may need to
shave or cut the trim of
formed or metal front
edged countertops to
clear the 30 3/4" width
of cooktop.
When replacing an existing unit, a
maximum depth of 23 1/2" is acceptable.
23 5/8"
minimum
flat area
Additional Information:
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2002.
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
Slide In Gas Ranges:
JGS8750ADS, JGS8750ADB and JGS8750ADW
• Product Model Number (s): •
This Data Sheet Includes Information On
BN220.55 • A174B149 • • 032603 • 95659 • 85619
149
Page 2
Jenn-Air