8
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
** To order direct, call 1-800-JENNAIR (1-800-536-6247).
PART PROCEDURE
Side Panels,
• When cool, wash with warm, soapy water, rinse and dry.
Never
wipe a warm or hot surface with a damp
and Door
cloth as this may damage the surface and may cause a steam burn.
Handles -
• For stubborn soil, use mildly abrasive cleaning agents such as baking soda paste or Bon Ami*.
Do not
use
Painted Enamel
abrasive cleaners such as steel wool pads or oven cleaners. These products will scratch or permanently
damage the surface.
Note: Use a dry towel or cloth to wipe up spills, especially acidic or sugary spills. Surface may
discolor or dull if soil is not immediately removed. This is especially important for white surfaces.
Stainless Steel
•
DO NOT USE ANY CLEANING PRODUCT CONTAINING CHLORINE BLEACH.
(select models)
•
DO NOT USE ABRASIVE OR ORANGE CLEANERS.
•
ALWAYS WIPE WITH THE GRAIN WHEN CLEANING.
•
Daily Cleaning/Light Soil ––
Wipe with one of the following - soapy water, white vinegar/water solution,
Formula 409 Glass and Surface Cleaner* or a similar glass cleaner - using a sponge or soft cloth. Rinse
and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray* (Part No.
20000008)**.
•
Moderate/Heavy Soil ––
Wipe with one of the following - Bon Ami, Smart Cleanser, or Soft Scrub* -
using a damp sponge or soft cloth. Rinse and dry. Stubborn soils may be removed with a damp multi-
purpose Scotch-Brite* pad; rub evenly with the grain. Rinse and dry. To restore luster and remove streaks,
follow with Stainless Steel Magic Spray*.
•
Discoloration ––
Using a damp sponge or soft cloth, wipe with Cameo Stainless Steel Cleaner*. Rinse
immediately and dry. To remove streaks and restore luster, follow with Stainless Steel Magic Spray*.
CAUTION
Oven Door
NEVER
place excessive weight on or stand on an open
oven door. This could cause the range to tip over, break
the door, or injure the user.
•
NEVER
attempt to open or close door or operate oven until
door is properly replaced.
•
NEVER
place fingers between hinge and front oven frame.
Hinge arms are spring mounted. If accidentally hit, the
hinge will slam shut against oven frame and could injure
your fingers.
To remove:
1. When cool, open the oven door
to the broil stop position
(opened about four inches).
2. Grasp door at each side.
Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
M
AINTENANCE
Cont.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Important:
The oven door on a new range may feel “spongy”
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1.
Do not
use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2.
Do not
hit the glass with pots, pans, furniture, toys, or
other objects.
3.
Do not
close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
8113P632-60
5/3/06, 8:30 AM
9
