7
Turning Refrigerator On and Viewing Set Points
■
Press the Cooling (ON/OFF) touch pad.
NOTE:
■
After the refrigerator is turned on, the Over Temperature audio
alarm and indicator light may activate every 1
¹⁄₂
hours until the
refrigerator and freezer temperatures are below 48°F (9°C) and
15°F (-9°C), respectively, or until the alarm is turned off. To
turn off the audio alarm and indicator light, see “Master Alarm
Reset.”
■
The Cooling ON/OFF touch pad on the control panel shuts
down refrigerator functions such as cooling, lighting, fans and
compressors. To turn the power off completely, use the power
ON/OFF switch located behind the top grille. See “Power On/
Off Switch.”
Viewing the Celsius Temperatures
■
Press the F/C touch pad. To redisplay degrees Fahrenheit,
press F/C again.
NOTE:
If the freezer temperature is below zero, the negative sign
next to the freezer display will light up. This is normal.
Adjusting Controls
NOTE:
Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To Adjust Set Point Temperatures:
■
Press the refrigerator or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature is reached.
■
Press the Set To Recommended touch pad to reset the set
points to the factory recommended temperatures.
NOTE:
The set point range for the freezer is -5°F to 3°F (-21°C
to -16°C). The set point range for the refrigerator is 34°F to
42°F (1°C to 6°C).
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
Not set correctly for conditions
REFRIGERATOR Control
1° higher
REFRIGERATOR too warm
High use or room very warm
REFRIGERATOR Control
1° lower
FREEZER too cold
Not set correctly for conditions
FREEZER Control
1° higher
FREEZER too warm/too little ice
High use or heavy ice use
FREEZER Control
1° lower
Water Filter Indicator and Reset
See “Water Filter Indicator” section.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily warm room temperatures.
■
Press MAX COOL to turn on the Max Cool feature. The Max
Cool indicator light will remain on for 24 hours unless manually
turned off.
NOTE:
The temperature display will remain at 34°F (1°C) and
-5°F (-21°C) for the refrigerator and freezer compartments,
respectively, while the Max Cool feature is enabled. After 24
hours, the refrigerator returns to the previous temperature set
points.
Alarm Functions
Master Alarm Reset
Pressing Alarm Reset once will turn off the audio alarm and
indicator light. The audio alarm will not sound again for the
current condition that caused the alarm until a new condition
occurs or until a Master Alarm Reset is performed.
A Master Alarm Reset can be performed by pressing Cooling
(ON/ OFF) twice or by turning the power to the refrigerator off and
on again. See “Power On/Off Switch.” After performing a Master
Alarm Reset, the indicator light will reactivate if the condition that
caused the alarm is still present. See “Over Temperature,” “Call
Service,” or “Door Open.”
Door Open
The Door Open indicator light will flash, an alarm will sound
and the interior lights will turn off when a door has been open
for longer than 10 minutes. When the door is closed, the audio
alarm will reset and turn off, but the Door Open indicator light
will continue to flash until the temperature is equal to or below
45°F (7°C) and 15°F (-9°C) for the refrigerator and freezer
compartments, respectively.
NOTE:
To deactivate the audio alarm and indicator light, see
“Master Alarm Reset.”
Over Temperature
IMPORTANT:
If the Over Temperature Alarm activates, your
food may spoil. See the “Power Interruptions.” Minimize door
openings until temperatures return to normal.
The Over Temperature feature is designed to let you know when
either the refrigerator temperature rises above 48°F (9°C) or
the freezer temperature rises above 15°F (-9°C) for longer than
1¹
⁄₂
hours. The audio alarm will shut off automatically when the
temperature returns to normal, but the indicator light will continue
to flash until the Alarm is pressed to let you know that an over
temperature condition has occurred.
