Jenn-Air JUCFP242HXPA, Use And Care Manual And Installation Instructions

14

2. 

Max Cool

The Max Cool feature assists with periods of heavy 

usage, full grocery loads or temporarily warm room 

temperatures. 
Max Cool will reset the temperature for the 

refrigerator drawer to 32°F (0°C) and -3°F (-19°C) for 

the freezer drawer for a 24-hour period.

Press MAX COOL to activate Max Cool feature.

NOTE: The temperature display will remain at -3°F 

(-19°C) and the indicator light will remain On for a  

24-hour period unless any of the following happens:

User adjusts any of the compartment 

      temperatures

Cool Off Mode is entered (activated by user)

Sabbath Mode is entered (activated by user)

After 24 hours, the temperature will automatically 

return to the previous temperature set point and 

the indicator light will turn Off.

NOTE: If the previous temperature set point was set 

to Soft Serve in the freezer drawer, the temperature 

will return to the recommended temperature (0°F/-

17°C) instead when Max Cool is complete.

3. 

Ice Maker and Water Filtration System 

(Refrigerator/Freezer Drawers only)

Connect to potable water supply.
IMPORTANT: After connecting the refrigerator to 

a water source or replacing the water filter, fill and 

discard three full containers of ice to prepare the 

water filter for use before using ice.

       TURNING THE ICE MAKER ON/OFF

IMPORTANT: Use the Ice maker touch pad on the 

control panel to turn on or off the Ice maker. Do not 

adjust the wire arm located on the ice maker.

Press the ICEMAKER touch pad to turn on the ice 

maker. The indicator will illuminate when On.

Press the ICEMAKER touch pad to turn off the ice 

maker.

REMEMBER:

Allow 24 hours to produce the first batch of ice.

The quality of your ice will only be as good as the 

quality of the water supplied to your ice maker.

Avoid connecting the ice maker to a softened 

water supply. Water softener chemicals (such 

as salt) can damage parts of the ice maker and 

lead to poor quality ice. If a softened water supply 

cannot be avoided, make sure the water softener 

is operating properly and is well maintained.

Do not store anything in the ice storage bin.

4. 

Using Presets

For your convenience, each drawer also has 

controls that are preset to recommended storage 

temperatures for specific products.
Pressing any preset option will set the temperature to 

the recommended temperature for each category:
Refrigerator Drawers

Produce: 39°F (3°C)

Assorted: 37° (2°C)

Beverage: 34°F (1°C)

Meat: 32°F (0°C)

Freezer Drawer

Soft Serve: 6°F (-14°C)

NOTE: Soft Serve is a temporary temperature setting 

that will only last for 4 hours and returns to the 

previous temperature set point when complete.

Assorted: 0°F (-17°C)

Spirits: -2°F (-18°C)

Deep Freeze: -8°F (-22°C)

5. 

Adjusting the Temperatures

When the refrigerator drawers are turned On for the 

first time, a recommended temperature is set by 

default. The controls adjust the temperature of both 

compartments independently.

To adjust set point temperatures, press “+” (plus) 

or “-” (minus) until the desired temperature 

setting is reached.

Model JUDFP242*
NOTE: The set point for the double refrigerator 

drawers model is 37°F(2°C). The set point range 

for this model is 32°F to 42°F (0°C to 5°C) for both 

compartments.
Model JUCFP242*
NOTE: The set point for the refrigerator/freezer 

drawers model is 37°F (2°C) for the refrigerator drawer 

and 0°F (-17°C) for the freezer drawer. The set point 

range for the refrigerator/freezer drawers model is 

32°F to 42°F (0°C to 5°C) for the refrigerator drawer 

and -8°F to 6°F (-22°C to -14°C) for the freezer drawer.
NOTE: Wait at least 24 hours between adjustments 

for the product to acclimate.

6. 

Viewing Celsius/Fahrenheit 

Temperatures

Press the F/C touch pad to toggle between displaying 

the temperature in degrees Fahrenheit and degrees 

Celsius. The corresponding indicator will illuminate.